Personal system of discountsfor wholesale buyers
Consultation technologistselection of the dispersion and the adhesive, the implementation in the production
Term of execution of the order from 3 daysround-the-clock production
Click on the picture to enlarge
Dispersions «DispoNix DM 603», «DispoNix DM 604»
Technical conditions: ТУ 2241-002-20514586-04
- Container:
- 1000 kg (ibc container)
Description
Special purpose modified poly vinyl acetate water dispersion.
Forms thin solid non adhesive film resistant to ultraviolet light, oils and petrol. The film is vapor-permeable, flexible and transparent. Non flammable. Safe on use, non toxic. Doesn't contain VOCs and formalin. Keep from freezing!
Usage
DESCRIPTION
Special purpose modified poly vinyl acetate water dispersion.
Forms thin solid non adhesive film resistant to ultraviolet light, oils and petrol. The film is vapor-permeable, flexible and transparent. Non flammable. Safe on use, non toxic. Doesn't contain VOCs and formalin. Keep from freezing!
FIELDS OF APPLICATION
For industrial use.
Main application area:
- Finishing agent component in textile industry;
- gluing compositions component for paper and cardboard;
- binder in recycling mineral fibers and fiberglass;
- binder for plaster blocks.
Recommended application area:
- in finishing industry;
- as concrete modifier.
SUBSTRATE
Dispersions are mechanically stable. Dispersions are compatible with starch compounds and cellulose gellatant, plasticizers and other components of finishing and gluing compounds. Compatibility with other types of dispersions should be checked by performing a test for efficiency and stability during storage. Incompatible with strong acids and alkalis and organic solvents. Avoid contact with corrosive metals.
Technical information
| Base | polyvinyl acetate |
| Dry residue, no less | 50% |
| Particle size, mcm | 1-3 |
| Viscosity, Brookfield (LVT), mPa*s |
7000- 16000 for DispoNix DM 603 3000-7000 for DispoNix DM 604 |
| Density, g/cm3, about | 1,1 |
| рН value, about | 5,5 |
| Frost-resistance | 4 cycles |
Manufacture determined technical data can vary depending on the storage conditions (within the standard).
CERTIFICATE
The product «Poly vinyl acetate homopolymer poor-dispersion» isn’t included in Part II of «Consolidated list of goods, subjected to Sanitary and Epidemiological Control at the Custom and the Customs Union Territory», proved by Commission of the Customs Union, on the 28th of May, 2010, №299, and not under mandatory certification.
Application
INSTRUCTION FOR USE
The use is due to technical specifications of finished products.
CONDITIONS
Minimum film formation temperature is +17оС. Heating up to +80оС is allowed during binder and binder-based gluing compounds production.
|
Preparing |
Ready to use after stirring. Gluing materials and glue should be withstood to the room temperature before use. If a different dispersion or adhesive was used on the equipment before DispoNix DM 603 or DispoNix DM 604, it is desirable to pre-wash the equipment and accessories. |
|
Cleaning |
Wash the tools with water after use. Delete dry product mechanically using water. |
Storage
STORAGE
Store in a dry place at +5…+35 °C, in a tightly sealed original container. Stir before using especially after long storage. Delete surface film before stirring if any. Delivery and storage of the frozen glue at 0°С and below shouldn’t be more than one month.
GUARANTED STORAGE LIFE
Expire date is 6 months in case if delivery and storing rules are followed. After expire date shouldn’t be used without tests.
HEALTH AND SAFETY
Air the room while working. Avoid skin contact until dry. Use rubber gloves. If skin or eye contact wash with large amount of water. Consult a doctor if needed. A separate material safety data sheet is available by request.
RECYCLING
Packing materials are recycled as consumer waste.
