Personal system of discountsfor wholesale buyers
Consultation technologistselection of the dispersion and the adhesive, the implementation in the production
Term of execution of the order from 3 daysround-the-clock production
Click on the picture to enlarge
Dispersion DispoNix DE 306
Technical conditions: 2241-002-20514586-04
- Container:
- 1000 kg (ibc container)
Description
Special purpose modified poly vinyl acetate water dispersion. Good adhesion to porous materials. Dispersion is used for cardboard spiral cartridge manufacturing, carton laminating and gluing labels. The product has low viscosity, long open time, good adhesion. On drying forms transparent elastic film. Non flammable. Non explosive. Safe on use, non toxic. Keep from freezing!
Usage
FIELDS OF APPLICATION
For industrial use.
Suitable for:
-
cardboard spiral cartridge manufacturing;
-
cardboard laminating;
-
gluing paper, carton for packaging.
SUBSTRATE
Dispersion is mechanically stable, suitable for spraying. Form thin solid non adhesive vapor-permeable film resistant to ultraviolet light, oils and petrol. Incompatible with strong acids and alkalis and organic solvents. Avoid contact with corrosive metals. Compatibility with other types of dispersions should be checked by performing a test for efficiency and stability during storage.
Technical information
|
Base |
modified polyvinylacetate |
| Particle size, micron | 1-3 |
|
Solid basis, % |
No less than 50 |
| Viscosity by Brookfield (LVT), mPa * s | 500±1000 |
|
Density, g / cm3, about |
1,1 |
| PH value | 5,5 |
Manufacture determined technical data can vary depending on the storage conditions (within the standard).
CERTIFICATE
The product «Poly vinyl acetate homopolymer poor-dispersion» isn’t included in Part II of «Consolidated list of goods, subjected to Sanitary and Epidemiological Control at the Custom and the Customs Union Territory», proved by Commission of the Customs Union, on the 28th of May, 2010, №299, and not under mandatory certification.
Application
INSTRUCTION FOR USE
The surface of the glued materials should be smooth, absorbent, without fat and other contaminants.
CONDITIONS
Working temperature (20±2)оС and air humidity should be no less 65%. Working temperature is no less than+16оС.
WORKING CONDITIONS
| Preparation |
Ready to use after stirring. Gluing materials and glue should be withstood to the room temperature before use. If a different dispersion or adhesive was used on the equipment before DispoNix DE306, it is desirable to pre-wash the equipment and accessories. |
| Tools |
Brushes, rolls, nozzles or any other suitable equipment. |
| Cleaning |
Wash the tools with water after use. Delete dry product mechanically using water or acetone- based liquids. |
| Application |
Apply the adhesive as a thin coat on one gluing side and press both sides tightly. Consumption depends on application method. |
Storage
STORAGE
Store in a dry place at +5…+35 °C, in a tightly sealed original container. Do not freeze! Stir before using especially after long storage. Delete surface film before stirring if any.
PACKAGE SIZE
1000 kg IBC container or any other container due to the customer need.
GUARANTED STORAGE LIFE
Expire date is 6 months in case if delivery and storing rules are followed. After expire date shouldn’t be used without tests.
HEALTH AND SAFETY
Avoid skin contact until dry. Use rubber gloves. If skin or eye contact wash with large amount of water. Consult a doctor if needed. A separate material safety data sheet is available by request.
RECYCLING
Packing materials are recycled as consumer waste.
