Dispersion «DispoNix DE 143»

Description

Special purpose modified poly vinyl acetate water dispersion plasticised. Forms thin solid non adhesive film resistant to ultraviolet light, oils and petrol. The film is vapor-permeable, flexible and transparent. Non flammable. Safe on use, non toxic. Doesn't contain VOCs and formalin. Keep from freezing!

Usage

Usage

DESCRIPTION

Special purpose modified poly vinyl acetate water dispersion plasticised. Forms thin solid non adhesive film resistant to ultraviolet light, oils and petrol. The film is vapor-permeable, flexible and transparent. Non flammable. Safe on use, non toxic. Doesn't contain VOCs and formalin. Keep from freezing!

FIELDS OF APPLICATION

For industrial use. 

Main application area:

- glue for wood, plywood and other wood-based materials, with a long open time, high elasticity of the adhesive seam. Suitable for pressing;
- glue used in the manufacture of furniture and doors, including manual glue application operations;
- glue for materials based on synthetic and natural fibers on the operations of fabric duplication by hot method. It has high adhesion to fibers, forms an elastic and strong, invisible adhesive seam
- glue for paper and cardboard, while it can be used both in its pure form and as part of compositions (compatibility with the components of which should be checked beforehand);
Recommended application area:
- as a concrete modifier;
- in the production of packaging, in the footwear and leather goods industry, etc.

SUBSTRATE

Dispersion is mechanically stable. Compatibility with other types of dispersions should be checked by performing a test for efficiency and stability during storage. Incompatible with strong acids and alkalis and organic solvents. Avoid contact with corrosive metals. The final strength of the adhesive joint is achieved after the glue has completely dried.

Technical information

Technical information

Base	modified poly vinyl acetate
Particle size, mcm	1-3
Dry residue	about 45 %
Viscosity, Brookfield (LVT), mPa*s	15000±5000  (23/64/20)
Efflux viscosimeter	about 40 s*
Density, g/cm3	about 1,05
рН value	about 5,5

Manufacture determined technical data can vary depending on the storage conditions (within the standard).
* Due to customer need.

CERTIFICATE

The product «Poly vinyl acetate homopolymer poor-dispersion» isn’t included in Part II of «Consolidated list of goods, subjected to Sanitary and Epidemiological Control at the Custom and the Customs Union Territory», proved by Commission of the Customs Union, on the 28th of May, 2010, №299, and not under mandatory certification.

Application

Application

CONDITIONS

Working temperature (20±2)^оС and air humidity should be no less 65%. Working temperature should be no less than +12^оС. Heating to +80^оС is allowed during cohesive process and adhesive based compositions.

APPLICATION

Preparing	Ready to use after stirring. Gluing materials and glue should be withstood to the room temperature before use. If a different dispersion or adhesive was used on the equipment before DispoNix DE 143, it is desirable to pre-wash the equipment and accessories.
Cleaning	Wash the tools with water after use. Delete dry product mechanically using water.

Storage

Storage

STORAGE

Store in a dry place at +5…+35 °C, in a tightly sealed original container. Stir before using especially after long storage. Delete surface film before stirring if any.

GUARANTED STORAGE LIFE

Expire date is 6 months in case if delivery and storing rules are followed. After expire date shouldn’t be used without tests.

HEALTH AND SAFETY

Air the room while working. Avoid skin contact until dry. Use rubber gloves. If skin or eye contact wash with large amount of water. Consult a doctor if needed. A separate material safety data sheet is available by request.

RECYCLING

Packing materials are recycled as consumer waste.